7
3. Specications
Measurement method : Detection of weight loss by heating & drying
Sample weight : 1 - 80g optional weight sampling format
Minimum displayable units : Moisture content (solids): 0.1% or 0.01% (selectable), Weight: 0.005g
(* The indication of 0.01% is not a guarantee of accuracy.)
Measurable quantities : Moisture content (wet base & dry base), weight, solid content
Measurement range : 0 - 100% (wet base, solids)
0 - 500% (dry base)
Reproducibility
(Standard deviation)
: Samples with a weight of 5 g or higher: 0.1%
(When using standard samples and measuring settings as determined by Kett
Electric Laboratory)
Measurement Mode : Automatic mode
Timed mode (1 - 120 min.)
Temperature setting range : 30 to 180ºC (in steps of 1ºC, temperature on dish)
Display : Backlit LCD display (96 x 40mm)
External output : RS-232C interface
Communications : Data output from "the data logger software FDL-02" (option)
Storage of measurement
settings
: 5 types
Temperature/humidity op-
erating range
: 5 - 40ºC, 85% RH or less (no condensation)
Heat source : Organic carbon heater (280 W x 2)
Temperature sensor : Thermistor
Power supply : AC 100V-120V (50/60Hz) : Power cord A (Flat blade attachment plug, Type A-1)
AC 200V-240V (50/60Hz) : Power cord B (Round pin attachment plug, Type C-4)
Power consumption : Max. 900 W
Dimensions and weight : 222 (W) x 360 (D) x 196 (H) mm, 3.2 kg
Sample dish : Stainless steel (110 mm in diameter, 11 mm in depth)
Accessories : 2 sample dishes, sample dish handler, wind shield, sample dish tray, spoon,
spare fuse (8A) ×2, package of aluminium foil sheets (10 per package), Power cord
A or B (Power plug conversion adapter), operating manual
Options : Printer set (includes a VZ-330 printer, a printer interface cable (VZC-14), printer pa-
per, and an AC adapter), printer paper (10 rolls), package of aluminium foil sheets
(500 sheets), RS-232C cable (VZC-52), Data Logger software FDL-02, Sample
crusher TQ-100, Deodorizing windshield case FW-100
To Next Page
Loading...
