Kett FD-660 - Page 23

23
3
Move to the selection of menu item.
Every time the [
Select
] key is pressed, the menu items
alternately blink in the order of “MODE” → “TEMP” →
“UNIT” → “OUTPUT” → “BIAS” → “CAL” → “MODE” → ….
①
Press the [
Select
] key.
②
Press the [
Enter
] key after “MODE” blinks.
4
Move to the selection of a measuring mode.
The currently selected measuring mode blinks.
Every time the [
Select
] key is pressed, “AUTO (automatic
mode)” and “TIME (timed mode)” alternately blink.
①
Press the [
Select
] key.
②
Press the [
Enter
] key after “AUT” blinks.
Automatic measuring mode is now selected.
5
Automatically, the monitoring time is displayed.
The currently selected monitoring time blinks.
6
Every time the [▲] or [▼] key is pressed, "0.5
min
” → “1
min
””
→ “1.5
min
” → “2
min
” → “0.5
min
”... alternately blink.
①
Press the [▲] or [▼] key to move to the monitoring time
to be selected.
②
Press the [
Enter
] key after your selecting monitoring
time blinks (1.5 minutes is selected in the example on
the left).
A monitoring time is now selected.
7
Since the measuring mode is specied, the "MODE" starts
blinking.
To exit from the "MODE" menu setting, press the [
Menu
]
key. The screen returns to the weight display screen.
To specify other menu items, press the [
Select
] key.
8
① ②
① ②
① ②