38
5
Open the heater lid, and place the weight on the sample
dish.
* When placing a weight on the sample dish, it should be
placed so that the center of gravity of the weight is near
the center of the dish.
6
Close the heater lid, and press the [
Enter
] key.
* Be sure to close the heater lid.
7
"-----g" is displayed.
Now, the 50-gram calibration is in progress.
8
After a short interval, "0.000g" blinks.
Open the heater lid, and remove the weight from the
sample dish.
To Next Page
Loading...
