EasyManuals Logo

Keysight Technologies E364 A Series User Manual

Keysight Technologies E364 A Series
255 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #144 background imageLoading...
Page #144 background image
Remote Interface Reference 3
E364xA User’s and Service Guide 143
STATus:QUEStionable:INSTrument:ENABle <enable value>
Set the value of the questionable instrument enable register. This register is a
mask for enabling specific bits from the questionable instrument event register
to set the instrument summary bit (ISUM, bit 13) of the Questionable Status
register. The ISUM bit of the Questionable Status register is the logical OR of
all the questionable instrument event register bits that are enabled by the
questionable instrument enable register.
STATus:QUEStionable:INSTrument:ENABle?
Return the value of the questionable instrument enable register.
STATus:QUEStionable:INSTrument:ISUMmary<n>[:EVENt]?
Return the value of the questionable instrument Isummary event register for a
specific output of the two-output power supply. The particular output must be
specified by a numeric value. n is 1 or 2. 1 selects output1, and 2 selects
output2. The event register is a read-only register which holds (latches) all
events. Reading the questionable instrument Isummary event register clears it.
STATus:QUEStionable:INSTrument:ISUMmary<n>:CONDition?
Return the CV or CC condition of the specified instrument. If 2 is returned, the
queried instrument is in the CV operating mode. If 1 is returned, the queried
instrument is in the CC operating mode. If 0 is returned, the outputs of the
instrument are off or unregulated. If 3 is returned, the instrument is in the
hardware failure. n is 1, 2, or 3.
STATus:QUEStionable:INSTrument:ISUMmary<n>:ENABle <enable value>
Set the value of the questionable instrument Isummary enable register for a
specific output of the two-output power supply. The particular output must be
specified by a numeric value. n is 1 or 2. 1 selects output1, and 2 selects
output2. This register is a mask for enabling specific bits from the questionable
instrument Isummary event register to set the Instrument Summary bit (bits 1
and 2) of the questionable instrument register. These bits 1 and 2 are the
logical OR of all the questionable instrument Isummary event register bits that
are enabled by the questionable instrument Isummary enable register.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Keysight Technologies E364 A Series and is the answer not in the manual?

Keysight Technologies E364 A Series Specifications

General IconGeneral
BrandKeysight Technologies
ModelE364 A Series
CategoryPower Supply
LanguageEnglish

Related product manuals