Keysight Technologies E364 A Series User Manual

Remote Interface Reference 3
E364xA User’s and Service Guide 149
Device specific commands
The following commands are device- specific to your power supply. They are not
included in the 1997.0 version of the SCPI standard. However, these commands
are designed with the SCPI standard in mind, and they follow all of the command
syntax rules defined by the standard.
APPLy {<voltage>|DEF|MIN|MAX}[,{<current>|DEF|MIN|MAX}]
APPLy?
CALibration
:COUNt?
:CURRent[:DATA] <numeric value>
:CURRent:LEVel {MIN|MID|MAX}
:SECure:CODE <new code>
:SECure:STATe {OFF|ON},<code>
:SECure:STATe?
:STRing <quoted string>
:STRing?
:VOLTage[:DATA] <numeric value>
:VOLTage:LEVel {MIN|MID|MAX}
:VOLTage:PROTection
DISPlay
[:WINDow]:MODE {VV|II|VI}
[:WINDow]:MODE?
OUTPut
:RELay[:STATe] {OFF|ON}
:RELay[:STATe]?
:TRACk[:STATe] {ON|OFF}
:TRACk[:STATe]?
SYSTem
:LOCal
:REMote
:RWLock

Keysight Technologies E364 A Series Specifications

General

Brand	Keysight Technologies
Model	E364 A Series
Category	Power Supply
Language	English