Keysight Technologies E364 A Series User Manual

3 Remote Interface Reference
120 E364xA User’s and Service Guide
System-Related Commands
DISPlay {OFF|ON}
Turn the front-panel display off or on. When the display is turned off, outputs
are not sent to the display and all annunciators are disabled except the ERROR
annunciator.
The display state is automatically turned on when you return to the local
mode. Press (Local) key to return to the local state from the remote
interface.
DISPlay:MODE {VI|VV|II}
Set the front panel display mode of the power supply. the V-V display mode
shows the voltages of the two outputs. The I-I display mode shows the
currents of the two outputs. The V-I display mode shows the voltage and
current for each output. At *RST, the power supply is set to the V-I display
mode.
DISPlay:MODE?
Query the state of the display mode. Returns a string VV, II, or VI.
DISPlay?
Query the front-panel display setting. Returns 0 (OFF) or 1 (ON).
DISPlay:TEXT <quoted string>
This command displays a message on the front panel. The power supply will
display up to 11 characters in a message; any additional characters are
truncated. Commas, periods, and semicolons share a display space with the
preceding character, and are not considered individual characters.
DISPlay:TEXT?
Query the message sent to the front panel and returns a quoted string.
DISPlay:TEXT:CLEar
Clear the message displayed on the front panel.

Keysight Technologies E364 A Series Specifications

General

Brand	Keysight Technologies
Model	E364 A Series
Category	Power Supply
Language	English