Application Programs 5
E364xA User’s and Service Guide 169
Example Program for C and C++
The following C programming example shows you how to send and receive
formatted I/O. This example programming shows you how to use the SCPI
commands for the instrument with the VISA functionality and does include error
trapping. For more information on non-formatted I/O and error trapping, refer to
the Keysight VISA User’s Guide.
The following C programming example was written in Microsoft® Visual C++
version 1.52 using project type QuickWin application, and using the large
memory model and C++ version 4.x or 5.0 using the Windows 32 application. Be
sure to move the “visa.lib (Windows® 3.1) or visa32.lib (Windows® 95/NT)” and
“visa.h” file to the lib and include development directory. These are usually found
in the c:\vxipnp\win(win95 or winnt)\lib\msc or c:\vxipnp\win
(win95 or winnt)\include directory.
Diode.c
/*Diode.C
This example program steps the power supply through 11 voltages and measures the
current response. It prints the voltage step and the current response as a table.
Note that the GPIB address is the default address from the factory for the power
supply.*/
#include <visa.h>
#include <stdio.h>
#include <string.h>
#include <time.h>
#include <conio.h>
#include <stdlib.h>
ViSession defaultRM; /* Resource manager id */
ViSession power_supply; /* Identifies power supply */
int bGPIB = 1; /* Set the number to 0 for use with the RS-232 */
long ErrorStatus; /* VISA Error code */
char commandString[256];
char ReadBuffer[256];
void delay(clock_t wait);
void SendSCPI(char* pString);
void CheckError(char* pMessage);
void OpenPort();
To Next Page
Loading...
Need help?
General
