Keysight Technologies E364 A Series User Manual

4 Error Messages
160 E364xA User’s and Service Guide
800
Outputs coupled by track system
This error occurs when coupling the outputs if the track mode is already enabled.
Tracking mode should be disabled first when coupling the outputs.
801
Outputs coupled by trigger subsystem
This error occurs when enabling the track mode if the outputs are already
coupled. Outputs should be uncoupled first to enable the power supply to
operate in the track mode.
[a] This error message is only applicable for serial MY53xx6xxx.
Table 4-1 Execution error messages

Keysight Technologies E364 A Series Specifications

General

Brand	Keysight Technologies
Model	E364 A Series
Category	Power Supply
Language	English