4 Verification
28 Keysight J7201A/B/C Operating and Service Manual
Operator’s Check for Local Operation
Recommended test equipment
Table 4-1 lists test equipment required for performance test verification and equipment
troubleshooting. Equipment other than the recommended models can be used, provided minimum
specifications are satisfied.
Instrument Settings
In order to perform quick test verification, the operator needs to ensure that instrument’s settings
are following recommendation settings as stated below.
Table 4-1 Recommended test equipment
Instrument type Option
N5222B PNA Microwave Network Analyzer, 900 Hz/10 MHz to 26.5 GHz 200
N4691B (3.5 mm ecal module 300 kHz to 26.5 GHz)
00F
83059B (3.5 mm through female to female)
N4690B (Type-N 50 ohm ecal module 300 kHz to 18 GHz)
00F
1250-1472 (Type-N through female to female)
Table 4-2 Instrument settings
Product model J7201A J7201B J7201C
Start frequency 50 MHz 50 MHz 50 MHz
Stop frequency 6 GHz 18 GHz 26.5 GHz
Number of points 120 360 530
To Next Page
Loading...
