Remote Interface Configurations 7
Keysight J7201A/B/C Operating and Service Manual 87
Now you can use the J7201A/B/C Web Browser Interface to access and control the instrument.
See “Exploring the J7201A/B/C Web Interface Over LAN” on page 88.
If you plan to program the instrument over LAN or use such programs, make sure you have
installed the required I/O software on your computer.
Use the Connectivity Expert utility of the Keysight IO Libraries Suite to add the J7201A/B/C and
verify a connection. When identifying the instrument, it is easiest if you use the IP address noted in
above table.
Now you can use various programming environments to control the J7201A/B/C. For an overview
on programming instructions via USB, refer to the Connectivity Guide.
If you have installed any other I/O software, refer to documentation included with that software.
To Next Page
Loading...
