2Installation
18 Keysight J7211A/B/C Operating and Service Manual
Initial Inspection
1 Unpack and inspect the shipping container and its contents throughly to ensure that nothing
was damaged during shipment. If the shipping container or cushioning material is damaged,
the contents should be checked both mechanically and electrically.
2 If the contents are damaged or defective, contact your nearest Keysight Technologies Service &
Support Office. Refer to the Service and Support information in the front matter of this manual.
Keysight Technologies will arrange for repair or replacement of the damaged or defective
equipment. Keep the shipping materials for the carrier’s inspection.
3 If you are returning your instrument for service, repackaging the attenuation control unit
requires original shipping containers and materials or their equivalents. Keysight Technologies
can provide packaging materials identical to the original materials. Refer to “Sales and
Technical Support” on page 4 for the Keysight Technologies nearest to you.
To Next Page
Loading...
Need help?
General
