Keysight Technologies J7211A User Manual

Remote Operations 5
Keysight J7211A/B/C Operating and Service Manual 51
To check number of cycles per section
The first command checks number of cycles for individual section. The second command shows
number of cycles for all sections. Following table lists numbers (1 - 8) representing each section of
the attenuators.
DIAGnose:RELay:CYCLe? (@1,8)
DIAGnose:RELay:CYCLe? (@1:8)
To display required J7211A/B/C’s information
The following commands display information for selected request.
DISPlay:ATTenuation
DISPlay:IO
DISPlay:PROGram
DISPlay:CYCLe
DISPlay:INFormation
DISPlay:UTILity
Table 5-1 Sections of attenuators
Attenuator A Attenuator B
Sec 11Sec 15
Sec 22Sec 26
Sec 33Sec 37
Sec 44Sec 48
NOTE
The first command above returns number of cycles for Sec 1 for attenuator A and Sec 4 for
attenuator B. Number of cycles for all sections will be displayed when second command is send.

Keysight Technologies J7211A Specifications

General

Brand	Keysight Technologies
Model	J7211A
Category	Control Unit
Language	English