Remote Operations 5
Keysight J7211A/B/C Operating and Service Manual 43
LAN configuration
The J7211A/B/C has three LAN operating modes:
– Dynamic mode (Dynamic Host Configuration Protocol or DHCP)
– Auto IP mode (Local PC Control or isolated LAN)
– Static mode (Manual mode)
Refer to “Connecting over LAN” on page 56 to configure the above LAN operating modes.
For more information about Keysight I/O Libraries software refer to Connectivity Guide. If you
have installed other I/O software refer to documentation that accompanies the software.
To Next Page
Loading...
