Keysight Technologies M9037A User Manual

36 Keysight M9037A PXIe Embedded Controller User Guide
Using the Controller BIOS Settings
Automatic Power-on
By the default setting, the M9037A will turn on as soon as it senses that power is
applied. This means that the chassis will power up as soon as you insert the
controller into an chassis. Alternate BIOS settings are:
- Start the system only when the chassis power switch is pressed
- Power the system to its last power state prior to losing power.
This can be configured from the Main BIOS screen > Power-up Mode.
Monitor System Status
The BIOS monitors the following on the controller module:
- PCIe switch temperature
- CPU temperature
- Main PC board temperature
- Power supply voltages
These can be observed from the Main BIOS screen > System Management.

Keysight Technologies M9037A Specifications

General

Brand	Keysight Technologies
Model	M9037A
Category	Controller
Language	English