Keysight M9037A PXIe Embedded Controller User Guide 65
BIOS Setup Controller Maintenance
Automatic Power-on
By default setting, the M9037A turns on as soon as it senses that power is
applied. This means that the chassis will power up as soon as you insert the
controller into a PXIe chassis. Alternate BIOS settings are:
- Start the system only when the chassis power switch is pressed
- Power the system to its last power state prior to losing power.
This can be configured from the Main BIOS screen > Power-up Mode.
Monitor System Status
The BIOS monitors the following on the controller module:
- PCIe switch temperature
- CPU temperature
- Main PC board temperature
- Power supply voltages
These can be observed from the Main BIOS screen > System Management.
System Date and Time
You can set the system date and time in the BIOS Main screen or in the Windows
Operating System.
To Next Page
Loading...
Need help?
General
