Keysight M9037A PXIe Embedded Controller User Guide 39
Windows Configuration Review Using the Controller
Microsoft Windows Update can sometimes be slow. There are many factors that
can interfere with Windows Update speed. If you find that is to slow and you
cannot wait, instead of waiting on Windows Update, you can perform an off-line
install. Use the following procedure:
1 “check for updates” and note all the KB numbers that it is trying to
download.
2 Browse to https://www.catalog.update.microsoft.com/Home.aspx
and
search for each KB by number.
3 In the search results select only the ones that match your installed OS. For
example for Windows 10 x64 LTSB, you would select “x64 Win 10 LTSB”.
4 Download each KB.
5 Install each KB.
6 Repeat this process until Windows Update says there are no more updates.
Auto Login
Your M9037A Windows default behavior is to automatically login to the
Administrator account every time it boots. You do not need to type a password.
Default Administrator Password: Keysight4u!
The Keysight standard for the Administrator password is: Keysight4u!
Your M9037A default Administrator account is most likely set with this password.
If it is not set with this password, then there is no password.
Change Administrator Password
The default Administrator password is public knowledge. Keysight recommends
that you change your password for improved security.
Microsoft Windows update might happen without user acceptance.
The factory image on your Embedded Controller has a default
configuration set to notify you before downloading and installing
any updates. However, Microsoft Windows will sometimes install
updates without notifying the user, even if configured to not
perform an update. If your application requires that Windows does
not perform updates, please work with your IT department to
determine the best solution. They may suggest isolating your
network or setting up a firewall.
To Next Page
Loading...
Need help?
General
