Keysight Technologies M9037A User Manual

72 Keysight M9037A PXIe Embedded Controller User Guide
Controller Maintenance Memory Modules
4 Spread the two memory clamps for the module you want to replace.
5 The memory module should pop up. Carefully slide the memory module out of
the edge connector.
To install memory modules, reverse the previous steps. Carefully place the
memory module in the socket. Press the module into the clamps until they lock
the module in place.
Replace the controller module in the PXIe chassis and power it up. The controller
BIOS should automatically detect the new memory.
To verify the amount of memory installed in your controller: from the Windows
Start menu, select Computer. Select System Properties. Under System, locate
Installed memory (RAM).
Figure 16 M9037A Memory Modules (both bottom and top modules shown)
Clamp for bottom module
Clamp for top module
Clamp for bottom module
Clamp for top module
Top Memory
module
Bottom Memory
module

Keysight Technologies M9037A Specifications

General

Brand	Keysight Technologies
Model	M9037A
Category	Controller
Language	English