34 Keysight N5991 Test Automation Software Platform Getting Started Guide
5 Using the Software
must enter their address strings in the ValiFrame Instrument Configuration
Window (see Figure 4). The recommended way of doing this is by copying
and pasting instrument addresses as follows:
1 Click the VISA Addresses field next to an instrument in the Connection
Expert.
2 Copy the address, and highlight the same instrument in the Test
Station Connection window.
3 Paste the address in the Instrument Address text field and click Apply
Address.
4 Repeat this procedure for all the instruments being used, except
standard specific applications running on the oscilloscope.
To Next Page
Loading...
Need help?
General
