Keysight N5991 Test Automation Software Platform Getting Started Guide 53
Using the Software 5
SParameters
The SParameter folder contains the S-parameter files which are required
for some applications.
N5991 Backup
Use the ValiFrame application data folder to save calibration data,
modified test pattern or settings for backup or transfer to another PC.
The files in the folder “Pattern” will be generated or if already exist, be
overwritten during a N5991 Software installation. In the “Settings” folder,
all instrument settings are overwritten by the installation except the .vset
files. In the “Calibration” folder, all files are generated by the calibration
procedures and will not be overwritten by the installation. To compare or
archive the calibration data, backup the “Calibration” folder.
To Next Page
Loading...
Need help?
General
