Keysight N5991 Test Automation Software Platform Getting Started Guide 33
Using the Software 5
Using Keysight IO VISA Connection Expert
The Keysight Connection Expert is recommended to set up new
connections or verify existing connections, for which you must perform the
following steps:
1 Start the Connection Expert by right-clicking the Keysight IO Libraries
Suite icon in the task bar
2 Select Connection Expert. A window as shown in Figure 16, is
displayed:
Figure 16 Keysight Connection Expert
3. Click Instruments > Rescan
For each instrument that is required, verify that an entry exists in the list
for the instrument and that before the VISA Address, there is a green
check mark. Once all the instruments to be used are listed properly, you
To Next Page
Loading...
Need help?
General
