52 Keysight N5991 Test Automation Software Platform Getting Started Guide
5 Using the Software
N5991 Data Structure
All the N5991 internal data is saved in the application data folder:
"ProgramData\BitifEye\ValiFrameK1\Application".
Note: Windows hides the system folders by default. To make the
application data folder visible, check the "Show hidden files and folders"
property in the Windows file explorer > View settings.
The ValiFrame application data folder contains the following folders:
• Calibrations
• CalibrationsOffline
• Data
• Settings
• Pattern
• SParameters
Calibrations
The calibration data is stored in the Calibrations or CalibratiosOffline folder
depending if the calibration was run in online or offline mode. For each
calibration procedure at least one calibration file is stored. These files are
text files and can be imported into MS Excel.
Settings
The Settings folder contains the default setting file for the instrument and
.vset files which contains the changes to the default registry entries. For
each application, a sub folder is created and a ValiFrame.vset file is
created in these sub folder as soon as any ValiFrame setting is changed
from its default. The settings files contain for example the instrument
connection setup.
Pattern
The Pattern folder contains the test pattern/sequence files. These are text
files which contain the pattern in hexadecimal format. The pattern can also
be defined with macros.
To Next Page
Loading...
Need help?
General
