Keysight N5991 Test Automation Software Platform Getting Started Guide 37
Using the Software 5
Configuring the DUT
The parameter selections available in the “Configure DUT” panel depend
on the specific application. Select all parameters which apply to the
particular application to configure the DUT as shown in Figure 19. Enter all
information which is relevant for the DUT and the tests need to run in the
text fields. The selected DUT parameters and the information entered by
the user will be shown in the measurement reports.
In most applications, the Compliance or Expert Mode must be selected
because in compliance mode, the tests run according to the specific test
specification. Where as in expert mode, the DUT can be characterized to
determine performance margins, for example, it is provided for advanced
users which may include additional tests. Also the tests might be
implemented differently than in compliance mode.
To Next Page
Loading...
Need help?
General
