[SOURce] Subsystem
The SOURce keyword is optional in many commands that set parameters for a source or output, such
as [SOURce:]CURRent <value>.
Because SOURce subsystem commands are often used without the optional SOURce keyword, these
commands are listed by their individual subsystems, below:
Subsystems and Commands Using the Optional [SOURce:] Keyword
ARB
CURRent
DIGital
FUNCtion
LIST
POWer:LIMit
STEP:TOUTput
VOLTage
5 SCPI Programming Reference
220 Keysight RP7900 Series Operating and Service Guide
To Next Page
Loading...
