Keysight Technologies RP7945A User Manual

STEP Command
[SOURce:]STEP:TOUTput 0|OFF|1|ON
[SOURce:]STEP:TOUTput?
Specifies whether a trigger out is generated when a transient step occurs. A trigger is generated when
the state is on (true).
Parameter Typical Return
0|OFF|1|ON, *RST OFF 0or1
Sets the step trigger signal to ON: STEP:TOUT ON
Keysight RP7900 Series Operating and Service Guide 225
5 SCPI Programming Reference

Keysight Technologies RP7945A Specifications

General

Brand	Keysight Technologies
Model	RP7945A
Category	Power Supply
Language	English