Keysight RP7931A/RP7941A
RP7931A/RP7941A
Test Record
Report Number ______ Date__________
Test Description Model Min. Specs Results Max. Specs
Voltage Programming & Readback
Minimum voltage (Vout):
Voltage measured over interface:
High voltage (Vout):
Voltage measured over interface:
Both
Both
Both
Both
0.017996
Vout - 0.002004
19.994
Vout - 0.006
_______
_______
_______
_______
0.022004
Vout + 0.002004
20.006
Vout + 0.006
CV Load Effect:
Both - 0.001 _______ + 0.001
CV Ripple and Noise
peak-to-peak:
rms:
Both
Both
N/A
N/A
_______
_______
0.030
0.003
Transient response @ 300 µs:
Both - 0.20 _______ + 0.20
Current Programming & Readback
Minimum current (Iout):
Current measured over interface:
High current (Iout):
Current measured over interface:
Both
Both
Both
Both
- 0.045
Iout - 0.045
399.795
Iout - 0.205
_______
_______
_______
_______
0.045
Iout + 0.045
400.205
Iout + 0.205
CC Load Effect:
Both - 0.025 _______ + 0.025
Current Sink Tests
100% of current rating: Both - 399.795 _______ - 400.205
RP7931A/RP7941A UUT Settings RP7933A/RP7943A Load Settings
Voltage Programming & Readback Min:
Voltage Programming & Readback High:
CV Load Effect, CV Ripple and Noise:
Transient Response:
Current Programming & Readback Min:
Current Programming & Readback High:
CC Load Effect:
100% of current rating (Isink):
Voltage priority: 0.02 V, 204 A
Voltage priority: 20 V, 204 A
Voltage priority: 10 V, 408 A
Voltage priority: 10 V, 408 A
Current priority: 10.2 V, 0 A
Current priority: 10.2 V, 400 A
Current priority: 20.4 V, 200 A
Current priority: 10.2 V, - 400 A
not used
not used
Current priority: 10.2 V, 400 A
Current priority: 10.2 V, 200 A to 400 A,slew=5 A/µs
Voltage priority: 10 V, 0 A
Voltage priority: 10 V, 408 A
Voltage priority: 20 V, 204 A
Voltage priority: 10 V, 408 A
6 Verification and Calibration
282 Keysight RP7900 Series Operating and Service Guide
To Next Page
Loading...
Need help?
General
