1 Getting Started
14 Keysight 2050/60 X-Series User’s Guide
Overview
The 2050/60 X-Series wide dynamic range power sensors consist of six USB models and
seven LAN models:
– U2053XA USB average power sensor (10 MHz to 33 GHz)
– U2063XA USB peak and average power sensor (10 MHz to 33 GHz)
– L2051XA LAN average power sensor (10 MHz to 6 GHz)
– L2052XA LAN average power sensor (10 MHz to 18 GHz)
– L2053XA LAN average power sensor (10 MHz to 33 GHz)
– L2061XA LAN peak and average power sensor (10 MHz to 6 GHz)
– L2062XA LAN peak and average power sensor (10 MHz to 18 GHz)
– L2063XA LAN peak and average power sensor (10 MHz to 33 GHz)
The 2050/60 X-Series is capable of measuring the average and peak power of modulated,
pulsed, and continuous wave (CW) signals in 10 MHz to 33 GHz frequency range and
–70 dBm to 26 dBm power range.
The L2050/60 Series LAN power sensor is capable of long distance remote monitoring of
up to 100 meters via the Power over Ethernet (PoE)/LAN connectivity. The PoE connectivity
is compliant to the IEEE 3 W, 802.3af or 802.3at Type 1 standard.
The typical LAN port on your PC or Keysight instruments is not able to power up the L2050/
60 Series LAN power sensor. The L2050/60 Series LAN power sensor must be connected to
a PoE port, which supplies the DC power required to power up the L2050/60 Series LAN
power sensor and to transfer data.
To Next Page
Loading...
Need help?
General
