Keysight 2050 X Series User Manual

1 Getting Started
22 Keysight 2050/60 X-Series User’s Guide
Figure 1-5 Auto-locate a USB instrument in Keysight Connection Expert
3 Click Send Commands To This Instrument > Send & Read to verify the sensor is connected.
4 When the sensor is connected, go to Chapter 2, "Using the 2050/60 X-Series with the
Keysight BenchVue" to launch the BenchVue Power Meter application, or proceed to
operate the sensor via remote programming.
Operating the sensor remotely using SCPI commands
You can send SCPI commands to operate the sensor. Refer to the 2050/60 X-Series
Programming Guide for details.

Keysight 2050 X Series Specifications

General

Brand	Keysight
Model	2050 X Series
Category	Accessories
Language	English