Keysight 2050 X Series - Figure 1-17 Auto-Locate a LAN Instrument in Keysight Connection Expert Via Static IP

Getting Started 1
Keysight 2050/60 X-Series User’s Guide 33
Figure 1-17 Auto-locate a LAN instrument in Keysight Connection Expert via Static IP
7 Click Send Commands To This Instrument > Send & Read to verify the L2051XA/52XA/53XA/
61XA/62XA/63XA is connected.
8 When the L2051XA/52XA/53XA/61XA/62XA/63XA is connected, go to Chapter 2,
"Using the 2050/60 X-Series with the Keysight BenchVue" to launch the BenchVue, or
proceed to operate the L2051XA/52XA/53XA/61XA/62XA/63XA via remote
programming.
NOTE
Alternatively, you can locate the L2051XA/52XA/53XA/61XA/62XA/63XA by entering its
default static IP address (192.168.0.10) at the Manual Configuration tab.