Keysight 2050 X Series User Manual

Name: Keysight 2050 X Series
Brand: Keysight
Rating: 4 (1 reviews)

77 pages

To Next Page

To Previous Page

Getting Started 1

Keysight 2050/60 X-Series User’s Guide 21

Hardware Installation and Configuration

Prior to using the 2050/60 X-Series, ensure that the following minimum requirements

are met:

– PC with USB and LAN host capability

– Keysight IO Libraries Suite 17.0 or higher installed

– Keysight BenchVue installed

Connect the U2053XA/63XA sensor

1 Connect the power sensor to the PC. The sensor driver is detected and installed

automatically.

Figure 1-4 Connect the U2053XA/63XA sensor to the PC

2 Launch the Keysight Connection Expert by selecting the IO icon ( ). Auto-locate the

sensor as shown in Figure 1-5. Click Rescan to start searching.

NOTE

For power measurements of < –60 dBm, it is recommended to turn on the 2050/60 X-

Series for 1.5 hours (with the 2050/60 X-Series connected to the device-under-test).

Questions and Answers:

Need help?

Do you have a question about the Keysight 2050 X Series and is the answer not in the manual?

General