260 Keysight N9927-90001 User’s Guide
IQ Analyzer (IQA) – Option 351 (CPU2 Only)
Using Markers (IQA)
Continuous Peak Search Marker
When the Continuous Peak Search marker is on, a peak search is automatically
performed for the selected marker after each acquisition. For additional marker
functionality, refer to “All about Markers” on page 484.
Summary:
— Cont Peak Search
Enables or disables the continuous peak search
— The rules for finding the peak are exactly the same as for Peak Search,
including the use of peak criteria rules.
How to measure with the Continuous Peak Search marker
—Press Mkr->/Tools to create or select a Normal or Delta marker to use the
Continuous Peak Search marker.
—Then press More
(RF Spectrum Only)
—Then press Mkr Properties
—Then Peak Criteria
—Then Cont Peak Search Enables or disables the Continuous peak search
marker (default: OFF).
To Next Page
Loading...
Need help?
General
