Ease of use with high performance
• Two operation modes; Scope mode and Data Logger mode (option STG)
• Two or four analog input channels with various wide-range and high-resolution sensors
• Front-panel interface provides easy access to the controls needed for time-domain
waveform analysis tasks.
• Large capacitive touch screen display allows the instrument operation without an external
pointing device.
• User interface with icons, windows, dialog boxes, and toolbars provides easy access to
dozens of configuration and analysis tools, ensuring you can set up and make the most
complex measurements.
• Current Waveform Analytics Software used on an external PC for post measurement
offline data analysis (Keysight CX3300APPC)
Front-panel interface
• Run control (Run/Stop and Single) starts waveform acquisition or make a single
acquisition in the Scope mode. It starts or stops waveform recording in the Data Logger
mode.
• Horizontal control sets sweep speed and trigger position, also adjusts horizontal scale.
• Auto Scale acquires waveform and sets the optimum scale automatically.
• Hi
gh Reso selects the 16-bit vertical resolution mode for the all analog channels.
• Clear Display clears the waveforms on the screen before one or more acquisitions.
• Default Setup sets initial configuration.
• Trigger control sets trigger source, sweep mode, trigger conditions, and trigger level for
synchronization with the observing waveform.
• Vertical control for adjusting vertical scale
• Color-coded k
ey’s LED indicates if the channel is active or not.
• LEDs indicate if the channel is controllable or not.
• Zoom activates the Zoom window.
Removable solid-state drive and USB 2.0 and 3.0 ports
• Solid-state drive for fast boot-up
• Saves the setup data to reuse it another time.
To Next Page
Loading...
Need help?
General
