14 Keysight Signal Generators Programming Guide
Getting Started with Remote Operation
Using the Web Browser
Enabling the Signal Generator Web Server
NOTE Javascript or Active Scripts must be enabled to use the web front panel controls.
1. Turn on the Web server as shown below.
Keysight MXG Web Server On
ESG/PSG Web Server On
2. Launch the PC or workstation web browser.
If necessary, toggle Web Server to
On.
For details on each key, use the key help.
Refer to
“Getting Help (Keysight
MXG)” on page 21
and the User’s Guide.
For additional SCPI command information,
refer to the SCPI Command Reference.
If necessary toggle Web Server On
Off to On.
For details on each key, use the Key and Data Field
Reference. For additional SCPI command information,
refer to the SCPI Command Reference.
To Next Page
Loading...
