115
Keysight E4980A/E4980AL
Precision LCR Meter
Service Guide
A Manual Changes
This appendix contains the information required to adapt this manual to
versions or configurations of the E4980A/E4980AL manufactured earlier than
the current printing date of this manual. The information in this manual applies
directly to E4980A/E4980AL units with the serial number that is printed on the
title page of this manual.
Manual Changes
To adapt this manual to your E4980A/E4980AL, refer to Table A-1 and Table
A-2.
The ten-character serial number is printed on the serial number label (Figure
A-1) on the rear panel.
Figure A-1 Serial Number Plate Example
Table A-1 Manual Changes by Serial Number
Serial Prefix or Number Make Manual Changes
Table A-2 Manual Changes by Firmware Version
Version Make Manual Changes
To Next Page
Loading...
