Keysight E4980A - Replacement Procedure

Keysight E4980A/E4980AL Precision LCR Meter 95
Replacement Procedure
Rear Panel Assembly Replacement
Replacement Procedure
Step 1. Reverse the order of the removal procedure.
Figure 6-11 Rear Panel Assembly Removal
When you fasten the Rear Panel with the five TORX T10 screws, set
screwdriver's torque to 8.7 in-lb.
When you fasten the ground cable with the TORX T20 screw, set
screwdriver's torque to 21.1 in-lb.
㪼㪋㪐㪏㪇㪸㫊㪼㪈㪇㪉㪌
㽲
㽳