Keysight M8050A High-Performance BERT Getting Started Guide 37
Basic Setup for M8050A 2
To install the software
1 Download the latest M8070B software from
www.keysight.com/find/M8070B.
2 Double-click the setup (.exe) file.
The InstallShield Wizard is displayed.
3 If displayed, click Install to continue or click Next if the system
controller meets the minimum system configuration requirements
displayed by the wizard.
4 When displayed, accept the license agreement and click Next.
5Click Install to start the installation then follow any on-screen
prompts/instructions.
6 In Windows click Start > All Programs > Keysight M8070B > Keysight
M8070B to verify software installation.
Step 10 - Starting the M8070B Software
1 Ensure that the system is powered up and ready to start as described
in the sections Basic Setup for M8050A on page 27.
2 On the host computer, click on Start > All Programs > Keysight
M8070B > Keysight M8070B.
3 Select the module options from M8070B Startup Options dialog box.
For details on the M8070B Startup Options dialog box, refer to M8000
Series User Guide or Online Help.
4Click OK. The Startup screen of the M8070B software should display.
Step 11 - Install Module Drivers in the M8070B Software
The M8070B system software supports module drivers. To use these
drivers, it is necessary to install the module drivers in the M8070B
software.
Please make sure that you have M8070B software version 9.0 or later
installed on your system.
The module driver file can be downloaded from Keysight web page
www.keysight.com/find/M8050A.
To Next Page
Loading...
