44 Keysight M8050A High-Performance BERT Getting Started Guide
2 Basic Setup for M8050A
Step 16 - Turning off the Chassis and Modules (If Required)
Turn off the chassis and module in the following sequence:
1 Turn off the host computer. If you are using the Keysight AXIe
Embedded Controller module as the host computer, ensure that you
shut down the controller by executing the Windows shutdown process.
2 Turn off the chassis by pressing the chassis ON/STANDBY switch on
the front panel of chassis. Do not use the circuit breaker for routine
turn off. The module(s) are turned off automatically with the chassis.
To Next Page
Loading...
