Keysight M8050A High-Performance BERT Getting Started Guide 47
Maintenance 3
Updating Software Components
Updated versions of the M8070B and module specific software
components are available on the Keysight website.
These software components are available as .EXE files. To download a
software upgrade:
1Go to http://www.keysight.com/find/M8070B
2Click the Technical Support option.
3Click the Drivers, Firmware and Software tab.
4 Type the model number of the instrument module for which software
update is needed and click Find. Model number is located on the front
panel of the module.
5Click the Drivers, Firmware and Software link on the module page.
6 Download the required software update from the list of available
updates.
Some instruments, such as M8058A/M8059A, have an internal fan to
keep the components cooled to normal operating temperatures. Make
sure that there is enough clearance for adequate air-flow.
The enclosure surface of the module may become hot during use. If you
need to remove the module, first power down the AXIe chassis, allow the
module to cool, and then pull the module out of the chassis.
For preventing damage, for usage tips, and for ESD information, read
and follow the instructions in the “M8100A Tips for Preventing Damage
Guide” (Document Part No. #M8000-91B30).
To Next Page
Loading...
