Keysight M8050A - Page 50

50 pages

To Previous Page

This information is subject to

change without notice.

Edition 1.0, April 2022

Printed in Germany

www.keysight.com

Main Page

Safety Summary3
Compliance and Environmental Information5
About this Guide6
Table of Contents7
Introduction11
Introduction12
M8050A Modules13
Overview13
M9505A Axie Chassis14
Axie Embedded System Module (USB ESM)15
Keysight M9537A Axie Embedded Controller Module16
Host Computer16
M8042A Pattern Generator17
M8042A Module Components17
M8042A Front Panel Connectors18
M8046A Analyzer Module20
M8046A Module Components20
M8046A Front Panel Inputs/Outputs Ports21
M8009A Clock Generator22
M8009A Module Components22
M8009A Front Panel Connectors23
M8058A/M8059A Remote Head for M8042A Pattern Generator24
M8058A/M8059A Remote Head Components24
Basic Setup for M8050A27
Step 1 - Unpack the Shipment28
Return the Damaged/Defective Item to Keysight for Repair/Replacement29
Step 2 - Set up the M8050A29
Step 3 - Set up the External Host Computer (Not Required for M8050A-BU3/BU5)29
Computer Hardware and Software Requirements30
To Connect Via USB30
To Connect Via Pcie31
Step 4 - Connect the M9505A Axie Chassis to a Power Supply31
Step 5 - Connect M8050A Modules with M8009A Clock Module32
Preparing Single-Channel System32
Preparing Two-Channel System33
Step 6 - Power up (if Connecting Via Pcie)34
Step 7 - Verify Basic M8050A Operation35
Step 8 - Install Keysight IO Libraries Suite (Not Required for M8050A-BU3/BU5)36
Step 9 - Install M8070B Software (Not Required for M8050A-BU3/BU5)36
Step 10 - Starting the M8070B Software37
Step 11 - Install Module Drivers in the M8070B Software37
Step 12 - Install the Licenses38
Installing Module Licenses (for Upgrades Only)39
Step 13 - Starting the Module Driver Interface from M8070B Software40
Step 14 - Using UXR Series Real-Time Oscilloscope as Analyzer41
Step 15 - Performing a Functional Test42
Step 16 - Turning off the Chassis and Modules (if Required)44
Maintenance46
Locating Electronic Manuals and Online Help46
Routine Care46
Updating Software Components47
Contacting Keysight Service and Support48

Keysight M8050A - Page 50

Table of Contents

Related product manuals