N5186A MXG and X-Series SA Measurement Guide 13
Basic Measurements
Making Measurements
Observe the frequency and amplitude accuracy of the MXG at low power
levels.
On the MXG:
1. Set Frequency to 8 GHz and Power to 0 dBm.
On the Signal Analyzer:
1. Select Frequency and set Center Frequency to 8 GHz.
2. Select Amplitude and set Ref Level to 0 dBm and Scale/Div to
10 dB.
3. Select BW > Video BW and set to Auto.
4. Select Peak Search.
To Next Page
Loading...