Keysight NFA Series Noise Figure Analyzers Service Guide 109
Instrument Messages
Event Messages
0 Error
–183 Invalid inside macro
definition
Indicates that the program message unit sequence, sent with a *DDT or *DMC
command, is syntactically invalid
–184 Macro parameter error Indicates that a command inside the macro definition had the wrong number or
type of parameters
Err# Message Verbose/Correction Information
0 No error The queue is empty. Either every error in the queue has been read, or the queue
was cleared by power-on or *CLS
Err# Message Verbose/Correction Information
To Next Page
Loading...
