Keysight N9010B - Page 393

Keysight N9010B EXA Signal Analyzer Service Guide 393
Replaceable Parts
Replaceable Parts
A12 YTF Preselector (not used in Opt 503)
Option 507, 513, 526 5087-7382
Option 532, 544 5087-7383
A12MP1 Gap Pad YTF Base 5022-7179
A13 RF Front End Assembly
Option 503, 507, 513, 526 N9020-60314
Option 532, 544 N9020-60315
A13A1 Bandpass Filter 0955-2469
A13W1 Cable Assembly, A13J10 to A13A1 Input (semi-rigid)
Option 503, 507, 513, 526 E6607-21178
Option 532, 544 N9020-20229
A13W2 Cable Assembly, A13J11 from A13A1 Output (semi-rigid)
Option 503, 507, 513, 526 N9020-20231
Option 532, 544 N9020-20046
A13MP1 Spacer, Bandpass Filter Mounting Adapter
(Option 503, 507, 513, 526)
E6607-25005
A14 L.O. Synthesizer Assembly N9020-60118
A15 Front End Control Assembly
Standard Instruments with Opt 503, 507, 513, 526 N9020-60098
Options B40, MPB, DP2, CR3, CRP, 532, 544
N9020-60172
e
A16 Reference Assembly N9020-60200
AT1 Fixed Attenuator, 6 dB
(Options B40, MPB, or DP2)
(connects to SW2)
08493-60026
B1-B2 Fan 3160-4199
J1 Type-N (f) RF Input Connector Assembly (Option 503, 507, 513, 526) 5002-0702
2.4 mm (m) Input Connector Assembly (Option 532, 544) N9030-60011
EMI O-Ring 18.75 mm ID
(used between RF Input Connector and Front Frame)
8160-1637
J2 EXT MIXER Connector (discard washer and nut, if supplied)
(Option EXM)
1250-1666
Table 14-1 All Replaceable Parts
Reference
Designator
Description Part Number