Keysight N9010B - 14. Replaceable Parts

387
Keysight X-Series Signal Analyzers
N9010B EXA Signal Analyzer
Service Guide
14 Replaceable Parts
What You Will Find in This Chapter
1. Part number tables for assemblies, mechanical parts, cables, front panel
connectors, and labels.
2. Part location diagrams for the following:
Figure 14-1, “Major Assemblies,”
Figure 14-2, “External Hardware (Benchtop Configuration),”
Figure 14-3, “External Hardware and Bail Handle (Option PRC),”
Figure 14-4, “External Hardware (Option PRC),”
Figure 14-5, “CPU Assembly,”
Figure 14-6, “Disk Drive Tray Assembly,”
Figure 14-7, “Top Brace,”
Figure 14-8, “RF Area - Standard RF/Microwave Instrument,”
Figure 14-9, “RF Area - Millimeter Wave Instruments, Option 532, 544,”
Figure 14-10, “RF Area - RF/Microwave Instruments with Options B40,
MPB, or DP2,”
Figure 14-11, “RF Area - RF/Microwave Instruments with Options B40,
MPB, or DP2 (switch detail),”
Figure 14-12, “RF Area - Millimeter Wave Instruments with Option B40,
MPB, or DP2,”
Figure 14-13, “RF Area - Millimeter Wave Instruments with Opt B40, MPB,
or DP2 (switch detail),”
Figure 14-14, “Front End Parts - Standard RF/Microwave Instruments,”
Figure 14-15, “Front End Parts - Millimeter Wave Instruments,”
Figure 14-16, “Front End Parts - RF/Microwave Instruments with Options
MPB, B40, DP2, CR3, or CRP,”
Figure 14-17, “Front End Control Cables,”
Figure 14-18, “Front End Control Cables - Options B40, MPB, DP2, CR3, or
CRP,”