414 Keysight N9010B EXA Signal Analyzer Service Guide
Replaceable Parts
Hardware
Figure 14-12 RF Area - Millimeter Wave Instruments with Option B40, MPB, or DP2
Table 14-14
Item Description Keysight Part Number
1 A9 RF Attenuator A 33326-60013
2 A10 RF Attenuator B 33325-60020
3 A11 Low Band Switch Assembly N9020-60051
4 A12 YTF Preselector (not used in Opt 503) 5087-7383
5 J1 2.4 mm (m) Input Connector Assembly (Option 532, 544) N9030-60011
W3 Cable Assembly, A11J2 to A13J2 (semi-rigid) N9020-20131
W9 Cable Assembly, A10 Output to A11J1 (semi-rigid) N9010-20004
W10 Cable Assembly, J1 to A9 Input (semi-rigid) N9020-20133
W11 Cable Assembly, A9 Output to A10 Input (semi-rigid) N9010-20002
W19 Cable Assembly, A16J701 to A9 Cal Signal Input/Port 2 (semi-rigid) N9010-20010
To Next Page
Loading...
