514 Keysight N9010B EXA Signal Analyzer Service Guide
Assembly Replacement Procedures
Analog I.F. (AIF)/Digital I.F. (DIF) Assembly
Analog I.F. (AIF)/Digital I.F. (DIF) Assembly
Removal
1. Remove the instrument outer case. Refer to the “Instrument Outer Case”
removal procedure.
2. Remove the rear panel. Refer to the “Rear Panel” removal procedure.
3. Refer to Figure 15-62 and Figure 15-63. Depending on the installed
options, remove the appropriate cables from the bottom of the DIF
assembly.
Figure 15-62 W12, W13 Removal - Standard Instruments
To Next Page
Loading...
