Keysight N9010B - Page 411

Keysight N9010B EXA Signal Analyzer Service Guide 411
Replaceable Parts
Hardware
Figure 14-9 RF Area - Millimeter Wave Instruments, Option 532, 544
Table 14-11
Item Description Keysight Part Number
1 A9 RF Attenuator A 33326-60013
2 A10 RF Attenuator B 33325-60020
3 A11 Low Band Switch Assembly N9020-60051
4 A12 YTF Preselector (not used in Opt 503) 5087-7383
W3 Cable Assembly, A11J2 to A13J2 (semi-rigid) N9020-20131
W7 Cable Assembly, A12 Output to A13J9 (semi-rigid) N9010-20006
W8 Cable Assembly, A11J3 to A12 Input (semi-rigid) N9010-20005
W9 Cable Assembly, A10 Output to A11J1 (semi-rigid) N9010-20004
W10 Cable Assembly, J1 to A9 Input (semi-rigid) N9020-20133
W11 Cable Assembly, A9 Output to A10 Input (semi-rigid) N9010-20002
W19 Cable Assembly, A16J701 to A9 Cal Signal Input/Port 2 (semi-rigid) N9010-20010