511
Assembly Replacement Procedures
Analog I.F. (AIF)/Digital I.F. (DIF) Assembly
Analog I.F. (AIF)/Digital I.F. (DIF) Assembly
Removal
1. Remove the instrument outer case. Refer to the Instrument Outer
Caseremoval procedure.
2. Remove the rear panel. Refer to the Rear Panelremoval procedure.
3. Refer to Figure 14-61 and Figure 14-62. Depending on the age of your
instrument and the installed options, remove the appropriate cables from
the bottom of the DIF assembly.
Figure 14-61 W12, W13 Removal - Standard Instruments
To Next Page
Loading...
