7 Save/Recall/Print
7.5 Page Setup
Remote
Command
:SYSTem:PRINt:THEMe FILLed | OUTLine
:SYSTem:PRINt:THEMe?
Example
:SYST:PRIN:THEM OUTL
Preset OUTL; not part of Preset, but reset by Restore Misc Defaults or Restore System Defaults All and
survives subsequent running of the modes
State Saved No
Backwards
Compatibility
SCPI
:SYSTem:PRINt:THEMe TDColor | TDMonochrome | FCOLor | FMONochrome
Backwards
Compatibility
Notes
To permit code compatibility with A-model X-Series Signal Analyzer instruments, the command
parameters from A-models are mapped as follows:
TDColor and TDMonochrome are both mapped to FILLed:
Exact full color representation of what is on the screen
FCOLor and FMONochrome are both mapped to OUTLine:
Uses color for traces and other items, but most filled areas are white
There is no Monochrome theme in B-models, so the A-models’ monochrome commands yield color
:SYST:PRINT:THEM? always returns FILLed or OUTLine; never FCOLor, FMONochrome,
TDColor, or TDMonochrome
Short Range Comms & IoT Mode User's &Programmer's Reference 2313
To Next Page
Loading...
