9 Programming the Instrument
9.4 Status Register System & STATus Subsystem
9.4 Status Register System & STATus Subsystem
This section provides an overview of the X-Series SCPI status register system, and
how to manage the registers. For detailed programming information on each status
register, see "Status Subsystem Registers and Commands" on page 2459.
The SCPI STATus Subsystem allows you to monitor a number of status conditions
within the instrument through the use of a hierarchy of status registers containing
bits which go true or false depending on various conditions.
9.4.1 Status Register System Diagram
The diagram below provides a top-level overview of all the Status Registers and
their interconnections.
To navigate to detailed information about each Register, click on a register name:
Short Range Comms & IoT Mode User's &Programmer's Reference 2450
To Next Page
Loading...
