3 Short-Range Comms & IoT Mode
3.3 LoRa (CSS) Demodulation Measurement
Auto Couple
Changes all Auto/Man settings in the measurement to either auto or manual.
Remote
Command
:COUPle ALL
Example
:COUP ALL
Backwards
Compatibility
Notes
:COUPLE NONE puts all Auto/Man parameters in manual mode, decoupling all the coupled
instrument parameters
Meas Preset
Restores the measurement local variables to their default values. This has the same
effect as sending the SCPI command CONF:LORA.
Short Range Comms & IoT Mode User's &Programmer's Reference 401
To Next Page
Loading...
