10 Hardware-Accelerated Fast Power Measurement (Remote Command Only)
10.5 Initiate Fast Power Measurement (Remote Command Only)
10.5 Initiate Fast Power Measurement (Remote Command Only)
Begins an acquisition and returns immediately. The results of the measurement can
be retrieved using :FETCh.
Remote Command
:CALCulate:FPOWer:POWer[1,2,…,999]:INITiate
Example
:CALC:FPOW:POW1:INIT
Notes Option FP2 is required
Short Range Comms & IoT Mode User's &Programmer's Reference 2525
To Next Page
Loading...
